WT-06 2~10Km 4AIN/DIN Wireless Data Acquisition Module
SMS, PC, App
10000 Unit/Units per Month
Packaging & Delivery
Name:Wireless Data Acquisition Module
The wireless transmitter, wireless repeater, wireless data acquisition modules are for S280 Wireless GSM 3G RTU. The WT-xx should work with S280 to create a wireless data acquisition systems.One S280 can accept max. 50 wireless Data Acquisition modules.
The Wireless GSM 3G RTU S280 can be used for monitoring maximum 400 distributed I/O endpoints though maximum 50 wireless Data Acquisition Modules by RF 433Mhz wireless network. Also it can be used as for converting the meters, transducers, Data Acquisition modules, PLC data via RS485 serial port to 433 MHz wireless network and then transmits it to GSM/SMS/GPRS/3G/Ethernet network. It performs as a wired – wireless – SMS/GPRS/ 3G/Ethernet/RS232/RS485 gateway. The range covers about 2~5Km, plus WT-02 Wireless repeaters can increase the wireless distance.
The Wireless GSM 3G RTU S280 equips 4 digital inputs, 2 solid relay outputs, power status detection moulde, and onsite temperature and humidity inputs. All of the inputs and outputs are isolation.
The Wireless GSM 3G RTU S280 can be used as Wireless SMS Alarm, when the equipped I/O or 400 distributed I/O alarm occurrence, it also can send pre-definition SMS to up to 10 mobile phone users.
The Wireless GSM 3G RTU S280 is suitable for lots of applications, e.g.: Wireless data logging, BTS monitoring, remote data acquisition, telemetrically, farm, energy saving, agriculture, automatically meter reading system, weather station, storage, factory and other applications.
The Wireless GSM 3G RTU S280 supports Modbus RTU Slave, Modbus TCP, TCP/UDP, SMS and data transparent transmission protocol through RS232/RS485/GSM/SMS/GPRS/3G./Ethernet.
S280 Wireless GSM 3G RTU & Wireless DAM Table
The Wireless GSM 3G RTU can be used as:
A Wireless Data Acquisition System. Supports monitoring up to 50 wireless data acquisition module for maximum 400 endpoints by 433Mhz wireless network, the range covers about 2~5Km, plus WT-02 Wireless repeaters can increase the wireless distance. Each endpoint can be setup threshold value or alarm conditions, once the value exceed threshold value or activated will send out SMS to alert the users immediately.
A Wireless Gateway. Though the WT-01 wireless data transfer unit, it can convert the meters, transducers, Data Acquisition modules, PLC data via RS485 serial port to 433 MHz wireless network and then transmits it to GSM/SMS/GPRS/3G/Ethernet network. It performs as a wired – wireless – SMS/GPRS /3G/Ethernet/RS232/RS485 gateway.
A SMS Alarm Controller. The IO activations or deactivations can be reported by SMS and optionally confirmed by phone calls. Each input can have its own message texts and the message can be programmed by users.
A Switch with SMS Remote Control. SMS texts for switching particular terminals on/off or pulse output are configurable.
A Timer-Switch which can be activated automatically. It can be setup when to performs preset logic events, e.g.: timer reports its status, timer switch on/off device or equipments automatically.
A SMS reporter. The WIRELESS GSM 3G RTU can setup daily automatically report one or more times of its current status to users automatically.
A Data Logger. The unit can save all of the events or acquisition data in internal memory storage, the historical data can export to CS format via USB port or upload to server by GPRS /3G network according to schedule, no distance limitation.
1. Security Alarm System applications; 2. Supervision and monitoring alarm systems
17. Control room application; 18. PLC and Automation System, M2M;
19. GSM Access Control System, GSM Gate Opener, etc.
System Schematic Diagram
1. ARM® Cortex™-M4 32 Bit RISC Core MCU;
2.Quadband 850/900/1800/1900Mhz GSM GPRS Module inside, WCDMA/CDMA2000 Modules are optional.
3.Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery;
4.Large internal memory to save up to 3500 historical records, USB port for configuration, upgrade firmware and export records;
5.Inbuilt industrial ISM Band 433Mhz Radio Frequency Half duplex communication module, distance up to 2~5Km;
6.Supports maximum 50 wireless Data Acquisition Modules, will alert users by SMS once the wireless DAM connect failure to ensure the monitoring working properly;
7.Supports maximum 400 wireless distributed I/O endpoints;
8.2 solid relay outputs, rated capacity is 5A/30VDC,5A/250VAC;
9.4 digital inputs, compatible to dry contact or wet contact inputs. Logic level: 0~0. 5V or short circuit treated as close, +3~30V or open circuits treated as open;
10.1 temperature & humidity sensor input for monitoring onsite environment, the sensor model is AM2301, Measures temperatures from -40-80°C,0.5°C accuracy, Relative Humidity from 0-99RH%, accuracy is 3%;
11.1 RS485 serial port (Optional: RS232) for Modbus RTU Slave to SCADA or data transparent transmission;.
12.I/O ports with opto-isolated, RS232/485/RJ45 with 15KV ESD protection;
13.Supports Modbus TCP,TCP/IP protocol, Definition Protocol and transparent transmission over GPRS/3G/ Ethernet network;
14.Automatically resend the data while GPRS/3G/Ethernet communication interrupt or failure, GPRS/3G failure will alert by SMS text to users;
15.Supports remotely restart the RTU, and configure& operate it by SMS commands remotely;
16.Supports over voltage protection and phase-reversal protection, provide DC power sources for external device to save wiring cost;
17.10 SMS Alert and auto dial numbers for receiving alarm message, can program to receive specified alarm message.
Packaging & Shipping
Why KING PIGEON?
King Pigeon is a professionalGSM/GPRS/3G wireless Alarm System, GSM elderly alarm,SMS Controller, Industrial Remote Controller, RTU Data Logger, Telemetry, Temperature Measurement Logger, Power Monitoring, M2M productsDesigner & Manufacturer in China since 2005.
Welcome OEM/ODM Service
Put Your LOGO on Unit and Package Available!
1. How to make sure the quality?
Process Quality Control
Final Quality Control
Outgoing Quality Control
2. How to get the order?
First,Tell us the model and quantity of the products you want.
Second ,we will make a PI for you.
Third, After confirm everything,the payment will be arranged (Paypal, Western Union,T/T orAli Trade Assurance for your money safetyare welcomed)
Fourth, we will send you the goods within the promissory time.
3. How about the Shipping?
The DHL,UPS,Fedex,TNT usually calculate the shipment based on measure size or weight. They compare the measurement size in Cube meters and Gross weight, and choose the large value to calculate the shipment cost. (Calculation Formula is : L*W*H/5000=Measurement Size weight, unit is cm)
Reference Shipment Cost
For example, ship to Denmark from China.
Average Cost for per Kg
For samples, ship by Express, usually 3-5days.
While place small order, try to make the finial weight more than 21Kg.
If the order weight less than 100Kg, recommend to ship them by Express.
If the weight is 101kg~200kg recommend to ship them by Air-cargo or express;
If the weight is above 200kgs, recommend to ship them by air cargo or by sea.
For small order by express, 20-30 pcs per order is the best.
4. What's the delivery time?
Sample within 1-3days;
Wholesales 4-7days according different quantities;
OEM 7-14 days after all info confirmed.
ODM depends on the detail requirements.
5. What is the warranty of your company?
2~3 years warranty for the main unit; one year warranty for the accessories.
Please send back the defective goods within the warranty period, we will repair them or send you new free.
Please send to us some pictures and video about it need to confirm your problem then we will send you free new goods or parts instead.
6. Can you do the design for us?
Yes, Just tell us your idea (logo,text., etc) and our professional R&D team will help to carry out your ideas into reality.